REQUIRED TOOLS
Wrench to size
ATTENTION: Usually the pedals, are marked on the head of the pin with the letter "D" (left) or "R" (rigth) or "S" (left) or "L" (left) to distinguish them.
STEP 1
In most cases, a 15 key is required. To facilitate the replacement and preserve the thread you should lubricate it with grease.
STEP 2
Install the right pedal (marked "R") on the right crank (chain side) by turning it clockwise
STEP 3
the left (marked "L") on the left crank screwing counterclockwise.
To check that the pedal bearings are efficient, rotate and move the pedals from left to right and from top to bottom with your hands. If you notice that the bearings are too loose or tight, call the shop for service
Attention
Check that you have made a good repair, performs a test before using the bike, in case you encounter any problem, please contact your trusted bicycle repair shop.