top of page
REQUIRED TOOLS
Wrench to size
STEP 1
Depending on the type of brake your bike you have to separate the pads from the wheel, release the brake.
STEP 2
Insert the wheel, taking care to place the hubs into the forks.
STEP 3
Manually and gradually tighten the nuts. Simultaneously from both sides allowing the centering of the wheel.
STEP 4
Using a wrench Thighten the nuts.
Attention:
A bad nuts tightening could make it dangerous to use the bicycle and may cause a fall or a brake system malfunction.
STEP 5
Depending on the type of brake of your bike thighten the brake.
Attention
Check that you have made a good repair, performs a test before using the bike, in case you encounter any problem, please contact your trusted bicycle repair shop.
bottom of page